THE OUTER CHINE IS OFFERED UP AFTER COMING OUT OF THE STEAMER,WHICH IS A LONG BOX WITH A HOLE AT THE BOTTOM WHERE THE HOSE OFF THE WALLPAPER STRIPPER IS STUFFED FORCING STEAM INTO THE BOX AFTER ABOUT 15 MIN'S THE WOOD IS REMOVED USING GLOVES AS IT'S HOT HOT HOT !!! NOTICE THE BOOK ON THE BOAT FOR REFERENCE, THE TAPE BELOW THE CHINE CATCHES THE GLUE DRIPS,















THE SCREWS ARE SUNK INTO THE WOOD ALLOWING PLUGS TO FILL THE HOLES IF THE GRAIN DIRECTION IS MATCHED THEN THERE ARE ALMOST INVISIBLE THEY ARE HELD IN WITH VARNISH AS THIS IS EASIER TO REMOVE WHEN WORN. ONCE SANDED THEY BLEND IN BEAUTIFULLY.